**These specific models of aircraft had approvals prior to September 28, 2003 (Grandfathered). Any STC approved or validated by any member state before the establishment of EASA is deemed to be approved under Regulation 1702/2003 Article 2a. This covers all previous approvals from minor changes to major changes, STCs and complete aircraft, both certifications and validations with the exception of products of the former Soviet Union.
FAA Form 8130-3, Export Airworthiness Approval Tag, can be provided for an additional charge of $100 if required by your Aviation Authority. Please specify when ordering.
MICRO Vortex Generator Kit for the Cessna 414A is FAA STC approved and ready for installation on your airplane. The Micro VG Kit includes the STC, VGs, installation tools, computer cut templates, detailed illustrated drawings and instructions, and Loctite® 330™ Depend® Adhesive for installing the vortex generators on your airplane.
Maximum take off weight
Maximum zero fuel weight
Testimonial / Endorsement
As one twin Cessna owner said, "The Micro VGs do everything you said they would do and more -- the tail of my airplane thinks it's four feet taller and the rudder thinks it's two feet longer!"
Benefits of Micro VGs
350 lb Gross Weight Increase
Reduced Vmc, Vs, Vso
FAA Certified Numbers
Compatible with 414AW RAM Kit
Easy One Day Installation
Micro VG Kit consists of 118 vortex generators mounted on the wings, just aft of the boot line and on both sides of the vertical stabilizer, plus four strakes (similar to the strakes which Cessna puts on the 303 Crusader), on the inside and outside of the engine nacelles. The Micro VG Kit includes an FAA approved Pilot's Operating Handbook Supplement (POHS).
We can usually ship the same day if your kit is ordered Alodined, ready to be painted. We can paint the VGs to match your airplane for an additional $250 per color. Painted kits usually ship within 3 days.