FAA-STC#: SA00376SE

Applicable Models: PA-23-250, PA-E23-250


Piper PA-23-250 Aztec with Micro VGs on wings

MICRO Vortex Generator Kit for the Piper PA-23-250 Aztec is FAA STC approved and ready for installation on your airplane. The Micro VG Kit includes the STC, VGs, installation tools, computer cut templates, detailed illustrated drawings and instructions, and Loctite® 330™ Depend® Adhesive for installing the vortex generators on your airplane.

   Improvement with
 FactoryMicroMicro VGs
Vmc80 mph IAS72 mph IAS8 mph
Vs71 mph IAS62 mph IAS9 mph
Vso62 mph IAS59 mph IAS3 mph

Testimonial

default image
Bob Unser showing his Beechcraft B36TC Bonanza with Micro VGs on horizontal stabilizer.

Bob Unser showing his Beechcraft B36TC Bonanza with Micro VGs on horizontal stabilizer.

Dear Charley,

The Micro Vortex Generators I bought from you for my Aztec have made it a new airplane! They not only do what you said they would but a whole lot more.

My ranch in New Mexico is at approximately 8000' elevation and before I had the Micro VG's installed I almost couldn't get in the air before I ran out of runway. Now it jumps off the runway; it wants to fly.

I can now land on the 2300' runway and some times not even use the brakes. It stalls a bit below 60 now and doesn't really stall, it just settles down with full control and full aileron response.

Charley, the Micro VG's on my Aztec gives me the improved performance to let me comfortably fly out of my ranch at 8000' elevation and 2300' runway. It is just fantastic and has also provided a large degree of safety I didn't have before, and that is very important as every one knows.

Anyone flying an Aztec (or anyone flying a twin) should have a Micro Vortex Generator Kit installed.

Thanks for a great product.

Yours Truly,

Bobby Unser October 1, 2015