Cessna 402C

$3245

plus shipping

MICRO Vortex Generator Kit for the Cessna 402C is FAA STC approved and ready for installation on your airplane.

The Micro VG Kit includes the STC, VGs, installation tools, computer cut templates, detailed illustrated drawings and instructions, and Loctite® AA 330™ adhesive for installing the vortex generators on your airplane.

Technical Information

ConfigurationFactoryMicro VGsImprovement
Vmc 80 KIAS 69 KIAS 11 kts
Vs78 KIAS 77 KIAS 1 kts
Vso68 KIAS 67 KIAS 1 kts
Maximum take off weight 6850 lbs 7210 lbs 360 lbs
Maximum zero fuel weight 6515 lbs 6750 lbs 235 lbs

STC Approvals

Untitled 1 01
FAA Form 8130-3, Export Airworthiness Approval Tag, can be provided for an additional charge of $100 if required by your Aviation Authority. Please specify when ordering.
**These specific models of aircraft had approvals prior to September 28, 2003 (Grandfathered). Any STC approved or validated by any member state before the establishment of EASA is deemed to be approved under Regulation 1702/2003 Article 2a. This covers all previous approvals from minor changes to major changes, STCs and complete aircraft, both certifications and validations with the exception of products of the former Soviet Union.

Testimonials

Benefits

  • 360 lb Gross Weight Increase
  • Reduced Vmc, Vs, Vso
  • FAA Certified Numbers
  • Easy One Day Installation

VG Locations

Micro VG Kit consists of 118 vortex generators mounted on the wings, just aft of the boot line and on both sides of the vertical stabilizer, plus four strakes (similar to the strakes which Cessna puts on the 303 Crusader), on the inside and outside of the engine nacelles. The Micro VG Kit includes an FAA approved Pilot’s Operating Handbook Supplement (POHS).

Paint Information

We can usually ship the same day if your kit is ordered Alodined, ready to be painted. An option for pre-painted VGs is available for an additional charge.